matromarine700x200MPS

Owatrol C.I.P. 0,75L
DKK 235,00
Antal:
Owatrol C.I.P. Rustbeskyttelse 750 ml.
C.I.P.
Direkte på rust

Owatrol C.I.P. 0,75L


Owatrol C.I.P. (Corrosion Inhibiting Primer)
Rustbeskyttende primer med meget god hæfteevne. Fæster også ved et minimalt forarbejde. Kan anvendes som primer på alle former for overmalinger, også 2 komponent malinger og malinger med højt indhold af opløsningsmidler. Penetrerer dybt ned i underlaget, kan anvendes på såvel rustne overflader som rent stål, giver en god vedhæftning.

  • Kan anvendes på rustne såvel som nye metaloverflader
  • Beskyttende overflade med god vedhæftning
  • God forsegling mod underlaget

 

PROPERTIES
Universal rust inhibiting primer for all paint types - Will not dissolve or break down when high solvenst paints applied to it.
Penetrates and stabilises the surface, forming a solid stable layer that other coatings can firmly adhere to.
Pigmentation offers increased protection and perfect film-forming qualities.
Easy to use, no need for sanding or sandblasting.
Use on new or rusted surfaces - interior and exterior.
High temperature resistance up to 175°C.

WHERE TO USE
C.I.P. (Corrosion Inhibiting Primer) is recommended for all severe environmental conditions: marine or tropical climates, corrosive fumes, protection of motor vehicles, construction equipment and ballast tanks of ships as well as every day items i.e. railings, gates....
The C.I.P. is especially recommended where a high resistant paint or two-pack finish (urethane, epoxy, chlorinated rubber, synthetic,...).is to be applied or necessary.

RECOMMENDATIONS BEFORE APPLICATION
Shake or stir paint well before and during use.
Do not dilute.
Remove all loose and flaking rust, mill scale and old paint back to a sound surface using a wire brush or scraper. It is not necessary to remove all firmly adhered rust.
Surfaces exposed to chemicals (salts, acids, alkalis...) should be washed with water or steam cleaned.
Severely contaminated surfaces should be cleaned using the appropriate solvent.
Before application, ensure surface is clean, dry and free from oil, grease and other surface contaminants.
With the C.I.P. sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.

  • Coverage: 15 m²/l
  • Application temperature: +5°C to +35°C
  • Drying: 6 h - Recoating time: 72 h (mini)

 

 

 


PA-1630680